? coilcraft, inc. 2007 specifications subject to change without notice. please check our website for latest information. smt power inductors - ser1360 series inductance 2 dcr typ 3 dcr max 3 srf typ 4 i sat (a) 5 i rms (a) 6 part number 1 10% (h) (mohm) (mohm) (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise ser1360-331kl_ 0.33 0.77 0.85 200 36 41 43 13.0 16.9 ser1360-651kl_ 0.65 0.77 0.85 160 23 27 28 13.0 16.9 ser1360-102kl_ 1.0 2.36 2.50 75 32 33 33.5 9.5 13.0 ser1360-182kl_ 1.8 2.36 2.50 50 17 19 20 9.5 13.0 ser1360-272kl_ 2.7 2.36 2.50 42 12 13 14 9.5 13.0 ser1360-402kl_ 4.0 5.50 5.80 34 11 12 13 7.1 9.4 ser1360-472kl_ 4.7 5.50 5.80 32 9.5 11 12 7.1 9.4 ser1360-602kl_ 6.0 5.50 5.80 28 8.0 9.0 9.5 7.1 9.4 ser1360-802kl_ 8.0 9.83 10.5 26 7.5 8.5 9.0 5.5 7.6 ser1360-103kl_ 10 9.83 10.5 24 6.2 7.0 7.5 4.4 7.2 document 290-1 revised 11/08/07 the ser1360 series provides exceptionally high current carrying capability (up to 48 amps) and very low dc resistance, all in a low profile, small footprint package. the part?s magnetic shielding and 13 13 mm base allow high density mounting while the flat wire winding keeps the overall height to just 6 mm. in addition to the standard values show, custom values are available to meet specific applications. document 290 -1 1. when ordering, please specify termination and packaging codes: ser1360-103k ld termination: l = rohs compliant matte-tin over nickel over phos bronze. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: d =13 machine-ready reel. eia-481 embossed plastic tape (500 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. inductance measured at 100 khz, 0.1 vrms, 0 adc on an agilent/ hp 4284a or equivalent. 3. dcr measured on a micro-ohmmeter. 4. srf measured using an agilent/hp 8753d network analyzer and a coilcraft smd-d test fixture. 5. dc current at which the inductance drops 10% (typ) from its value without current. 6. current that causes a 40c temperature rise from 25c ambient. 7. electrical specifications at 25c. see qualification standards section for environmental and test data. refer to doc 362 ?soldering surface mount components? before soldering. designer?s kit c365 contains 3 each of all values core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 2.6 ? 2.8 g ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?55c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) mean time between failures (mtbf) 26,315,789 hours packaging 500 per 13 reel; plastic tape: 24 mm wide, 0.4 mm thick, 16 mm pocket spacing, 6.6 mm pocket depth pcb washing only pure water or alcohol recommended
? coilcraft, inc. 2007 specifications subject to change without notice. please check our website for latest information. document 290-2 revised 11/06/07 document 290 -2 smt power inductors - ser1360 series l vs frequency l vs current 0.1 1 100 10 current (a) inductance (h) 1 2 3 4 5 6 7 8 9 0 10 11 12 6.0 h 1.8 h 4.0 h 4.7 h 10.0 h 8.0 h 0.33 h 1.0 h 1 2 3 4 5 6 7 8 9 0 10 11 12 0.01 0.1 10 1 inductance (h) frequency (mhz) 1.8 h 4.0 h 4.7 h 10.0 h 6.0 h 8.0 h 0.33 h 1.0 h -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) percent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rms 25c current derating temperature rise vs current 80 70 60 50 40 30 20 0 10 temperature rise (from 25c) current (a rms) 5 02025 15 10 0.33 h 8.0 h 10.0 h 6.0 h 1.0 h 1.8 h 4.0 h 4.7 h e f d d g i h c a b k n j j l lm 1 2 3 recommended land pattern abc max max max d e f g h i jklmn 0.508 0.516 0.228 0.106 0.008 0.173 0.012 0.094 0.008 0.087 0.008 0.367 0.008 0.079 0.008 0.121 0.163 0.089 0.355 0.109 12,9 13,1 5,8 2,7 0,2 4,4 0,3 2,4 0,2 2,2 0,2 9,3 0,2 2,0 0,2 3,07 4,14 2,26 9,0 2,77 1 2 3 terminal 3 is for mounting stability only. dimensions are in inches mm
|
